Canon Ij Setup imagePROGRAF PRO-4000

Canon Ij Setup imagePROGRAF PRO-4000

 

Canon Ij Setup imagePROGRAF PRO-4000 Canon Ij Setup imagePROGRAF PRO-4000

Canon Ij Setup imagePROGRAF PRO-4000 – As I said in a current post, my old huge configuration printer has surrendered the apparition, so I’ve quite recently had another Canon imagePROGRAF PRO-4000 introduced, and today I will walk you through a portion of the key new highlights and give my sentiment of this new printer.To be absolutely genuine, with my old 24″ iPF6350 breaking after only six years, for a couple of moments, I considered moving far from Canon for my huge organization printing, yet then I understood that there was another line of huge arrangement printers that has quite recently been declared, so I chose to investigate, and was extremely energized by what I saw.

At first, I was basically going to supplant my 6350 with the PRO-2000, which is the successor 24″ wide move media printer, however despite the fact that this new scope of PRO printers are smaller, they are more than double the stature, which implies the Canon Ij Setup imagePROGRAF PRO-4000 can’t be conveyed up to my third floor studio. It just won’t fit around the highest point of the stairs, even remained on end.

There was a choice to have it crane lifted up to the third floor and go in through the window, however this would cost $1,500, and afterward obviously another $1,500 to have it brought down again on the off chance that I move, or when it unavoidably breaks again sooner or later the future.Before singing the agreement, I went to the Canon S Tower here in Tokyo and made various vast prints on three sorts of Breathing Color media, and I was exceptionally content with the outcomes. Note that I did my tests on the PRO-2000, preceding I heard the cost for the crane lift, however the 2000 and 4000 are practically indistinguishable aside from the width of move media that can be utilized. This additionally implies this audit will be similarly as helpful in the event that you are thinking about the PRO-2000 as it will for the Canon Ij Setup imagePROGRAF PRO-4000.

Anyway, my PRO-4000 touched base on August 9, and took four individuals to convey it up to the second floor, and put it onto its stand. I have since spent the most recent five days setting it up, making my ICC profiles, and becoming acquainted with this lovely new bigger organization printer from Canon.

What’s New Canon Ij Setup imagePROGRAF PRO-4000?

Before we take a gander at a few prints, how about we speak a little about what’s new with the PRO-4000. All things considered, Canon have discharged another arrangement of inks for this lineup called LUCIA PRO ink, which really diminishes the quantity of hues from 12 to 11 shade inks, yet they included another Chroma Optimizer.From the Canon site, I see that “LUCIA PRO ink definition incorporates smaller scale exemplified colorants that empower smooth inclinations, an extended shading array, and more profound shading articulation.” In numerous ways, I concur with this announcement, yet I’m really not persuaded that the shading extent is extended. Truth be told, for some particular circumstances utilizing matte media I’d the range has been gotten a bit, however I’ll speak more about this later…

The Chroma Optimizer is utilized when imprinting on gleaming and semi-polished media, and goes about as a reasonable coat, enhancing shading and enhances the dim territories of sparkle prints. The new inks and Chroma Optimizer are additionally said to enhance scratch protection and decrease graininess. We’ll investigate some genuine prints in the blink of an eye Canon Ij Setup imagePROGRAF PRO-4000

I was additionally cheerful to find that the dark line that was constantly left on the correct underside of the prints is not any more an issue. That is something that bothered the hellfire out of my about my iPF6350 and I realize this was not settled the 6450, so it’s decent this is at long last settled.

Just a single Print Head Canon Ij Setup imagePROGRAF PRO-4000

While my old printer had two print heads, costing around $300 each, the new PRO printer lineup utilize only one, 1.28″ wide print head with 18,432 spouts and hostile to stopping up innovation. This new print head costs around $500, so there’s a $100 sparing when that should be supplanted, expecting that you’d change the two heads on the old models obviously. Having quite recently the one head likewise empowered Canon to make the printer smaller in width, which is a decent space saver.Having simply the one print head additionally empowered Canon to accelerate the printing impressively. A 18 x 24 inch print on my old printer used to take around 9 minutes, however with the new PRO-4000 a similar size print takes surmised 3 minutes 40 seconds.

New Media Loading Mechanism Canon Ij Setup imagePROGRAF PRO-4000

The media stacking instrument has additionally been completely changed. You now stack the move from the front of the printer by opening the Top Cover and the Output Guide as should be obvious in this photograph (beneath). In the wake of dropping the media on its holder into put, you turn the move holder which manages the media up into the printer, until the point when you hear a beep, to tell you that the printer would now be able to sustain the media.Then, you close the two covers and press a catch the LCD show to advise the printer to simply ahead and bolster the paper. Not exclusively does this mean we don’t need to touch the paper to such an extent, we additionally now have the advantage of the paper being topsy turvy for more often than not before it’s imprinted on.

Canon Ij Setup imagePROGRAF PRO-4000 This is an advantage since it implies that clean is more averse to settle on the print side of the media as you print, and tidy that is now on the media, will probably tumble off, before it’s imprinted on. In the event that you print on clean, the tidy for the most part tumbles off as the print dries, leaving a white spec, and for the quality cognizant printer that implies that the print has be made again sans preparation.

Media Information Update

Another exceptionally decent touch that I’m almost certain I couldn’t do with my old iPF6350, is that you can refresh the Media Information in the printer drivers on different PCs. Previously, on the off chance that I included a custom media compose, similar to a move of Breathing Color paper, to the printer, to get that same media in the drivers on an alternate PC, I needed to utilize the Media Configuration Tool and include the media again.The Red “L” Line

Before we proceed onward from the physical contrasts, obviously, there is the expansion of the red line that Canon use on their “L” focal point run, to stamp that they are the highest point of the range. This is advertising, yet it’s an imperative explanation from Canon, that they have made these printers with their most elevated norms.

Bookkeeping Manager Software

One thing that I hated about my old printer is that the Accounting Manager programming was just accessible on Windows, yet that is changed. Presently it’s likewise accessible for Mac, so I would now be able to track how much ink and paper is being expended for each print. You basically enter the cost of your different sorts of media and inks, and the product computes the cost of each print you make.

This is important for estimating prints, yet additionally, I print for other individuals at times, regularly with a hourly rate for my opportunity, in addition to the cost of materials. As of recently, I’ve needed to begin a Parallels session and open the Accounting Manager in Windows, yet that is inconvenient, so I’ve never enjoyed doing that, particularly before the client. Presently I can simply wrench up the Accounting Manager and see costs in a flash, in that spot on my Mac.

Group’s Print Studio Pro Has No Border Settings (Corrected)

Another new bit of programming from Canon that I attempted it their Print Studio Pro, which at first look looks OK, however I saw straight away that there was no real way to enter particular outskirt measurements. I get a kick out of the chance to print my pictures at a particular balance, marginally above focus, and to achieve this in Lightroom or Capture One, I can enter in the measurements of the outskirts down to a tenth of a millimeter precision.

In Print Studio Pro, I can move the print around the page with my mouse, however that is it. There’s no real way to enter the fringe measurements precisely. I may have missed this, however I looked for some time, and couldn’t discover anything, so if it’s there, it’s well covered up.

[UPDATE: Having been provoked by a client remark beneath, I backpedaled into Print Studio Pro and the outskirt settings were there. I don’t know what happened at first, but rather you can set the fringes precisely. Sorry about that!]

Look at Full Details on Canon Web Site

There are other new highlights, yet you can see full subtle elements on the Canon Web webpage. These are only the new highlights and changes that I’m cheerful to find in the new PRO-4000, and these all apply to the PRO-2000 also. The PRO-4000s and PRO-6000S are the new 8 shading 44 and 66″ printers, which are not so much appropriate for artistic work photography printing. That is the short review about Canon Ij Setup imagePROGRAF PRO-4000 .

Canon Ij Setup imagePROGRAF PRO-4000 Canon Ij Setup imagePROGRAF PRO-4000 Printer Wireless Connection Setup

Before endeavoring to associate your Canon printer to your remote system/wireless network, please consider that you meet these two conditions:

  1. Make sure that your device has an access point (it can be referred to as a hub or router ) that enable you to have Internet connection. The access point should work well before proceeding the next step.
  2. Make sure that the device you want to associate works well, the device can be a PC, Mac, Tablet or Smartphone, and is successfully connected to the Internet. To confirm the connection works well, you can browse a website from the computer, for example http://canoncomijset-up.com. If the webpage does not show, that means the connection is not successfully set up and try to fix the connection before proceeding.

ATTENTION

If you dont have basic knowledge about IT and not sure the way to set up access point and Internet connection, please use the instruction manual as the reference for the access point or you may contact the Internet Service Provider (ISP).

KEYWORDCanon Ij Setup imagePROGRAF PRO-4000 USB Connection

Here are some steps that you can follow if you wish to use your printer Via USB Connection:

  1. Download driver below based on your OS
  2. Connect your printer via USB cable
  3. Choose items from the Start menu as shown below
  4. If your computer operates on Windows 7, select the Start menu -> Devices and Printers.
  5. If your computer operates on Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
  6. If your computer operates on Windows XP, select the start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes.
  7. Right-click your model name icon, and then select Printing preferences from the displayed menu

Canon Ij Setup imagePROGRAF PRO-4000 Links

Download
Category
Windows all versions 32bit
Windows all versions 64bit

Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6

Download
Category
Linux (RPM/DEB)

Canon Ij Setup imagePROGRAF PRO-4000 Canon Ij Setup imagePROGRAF PRO-4000